Planters That Go Around Posts

DIY Outdoor Planter Box for Hanging String Lighting

Continuing our backyard makeover with a hanging string lighting update was the perfect way to weekend warrior our project list.Ready to Make your own DIY Outdoor Planter Box and Start Hanging String Lighting?

Step 7:Insert hook to top of pole to attach your hanging string lighting.Step 9:Optional: Depending on the weight of outdoor lighting you may need to add weight to the base of your outdoor planter box.

Step 10:At this point, you could paint or stain, and I would recommend one or the other to give some outdoor weather protection to your new DIY outdoor planter box for hanging string lighting.

Easy Spring DIY Planter Post

In this post, I’m sharing how to create an easy DIY planter post to hang flowers on this spring and summer!Step 1: Cut Planter Post and Supports You can make your 4×4 post any height, but I made this one about 54″ tall.

So I cut a 54″ long piece off my 4×4 post first..Then, I cut two angled supports to go inside the barrel planter to help keep the post upright..Step 3: Fill Planter Once the post was secured to the planter, I filled it with mulch.Step 5: Add Planter Post Cap The final piece was adding the post cap on the top.

Planters around supporting pergola posts. — BBC Gardeners' World

Hi there I am hoping I'll be able to get get some advice on what to do and how to do it correctly on here.I have built a pergola to the back of my house and now plan to plant vines and climbers from the planters that surround the supporting posts, my question is what do I cover the post with?A membrane and then plastic sheeting to avoid condensation and rot and for the planter base and sides some membrane only?What about water and will it dry quickly as there'll be a gap of about 40cm between soil/base and the concrete base?Could I cover the posts with some rough timber?Anyway I hope this clears things up for an answer as I don't want to put things in for the timber and base to rot and fall down!Thanks for reading.

Design Outdoor Vertical Gardens on Porch Posts Mailboxes and More

Pergolas Adjustable Half-Wrap Hanging Planter: Wrap Around Square Container for Flowers and HerbsThis item will be gift wrapped in a Luxurious Gift Box.Pergolas Adjustable Half-Wrap Hanging Planter: Wrap Around Square Container for Flowers and Herbs .Pergolas Adjustable Half-Wrap Hanging Planter: Wrap Around Square Container for Flowers and Herbs .Pergolas Adjustable Half-Wrap Hanging Planter: Wrap Around Square Container for Flowers and Herbs , Rubber 2 Band D&D PowerDrive BX110/02 Cogged Banded V Belt.Pergolas Adjustable Half-Wrap Hanging Planter: Wrap Around Square Container for Flowers and Herbs , SIMPLEX Gasket 89973.

DIY Planter Posts for String Lights

We decided to build DIY planter posts to serve as a hanging point for our string lights and it turned out SOOOOO good!How to Make DIY Planter Posts for String LightsMaterials Needed:Note: Make sure you scroll all the way down to see the nighttime view of the lights!

You’ll use one side to hang your string lights and the other side to hang a plant or lantern.Step 5 – Use metal hanging wire to attach the string lights to the soffit of your roof line.Check out more views of our patio below and how the string lights really define our outdoor space and add a cozy ambiance at night!

Fox Hollow Cottage DIY Planter Pot Poles For Cafe String Lights -

DIY Planter Pot Poles For Cafe String LightsMany of you have been so patiently waiting for this one… and today I’m finally sharing how we made our planter pots with poles to hang our cafe lights from!Keep on reading and we’ll walk you thru this super simple and fuss-free DIY tutorial on how to make your own planter pot poles for hanging outdoor string lights of any kind.

You can use a DIY planter pots, or store bought planters.You can use the following tutorial with store bought or DIY planter pots.In total, it took about 30 minutes to set up all three of the light pole planter pots.

Anchor a Gazebo with Planters: With DIY Planter Box Plans

PinShareTweetLearn how we built four easy DIY flower boxes to go around our gazebo posts to help weigh the gazebo down.Get the DIY Planter Box Plans!

DIY Gazebo Box Planters to Anchor Your GazeboHere’s the video tutorial, or keep scrolling for the photo tutorial.

How to make your own gazebo box plantersSupplies:Step by Step TutorialCheck out your legs for your gazebo.The middle side should have the pocket holes facing out if your boxes are as small as mine.

Round half circle pots

Hi all, I am looking for half circle pots similar to what's in the photo.We are looking for something that will fit around a 10" post.

Does anyone know of a supplier that won't cost $1000?A DIY approach might work also.As always, thanks for any help in advance.

DIY Planter with Pole for String Lights

DIY Planter with Pole for String LightsI absolutely love how this string light pole planter project turned out.How to Hang String LightsStep Six: If you are attaching the string lights to your house, you can use the same screw hooks.

There are plastic soffit hooks on the market for Christmas lights, but they don’t seem durable enough to withstand the weight of the outdoor string lights and year-round weather.What Size Pole for String LightsYou want a wooden pole that is sturdy enough to carry the weight of your string lights and that is tall enough to provide clearance beneath the lights.What Kind of String Lights Should I Hang OutdoorsWhen choosing outdoor string lights, you’ll want to make sure the lights you purchase will stand up to the elements.

The Easiest DIY Concrete Planter Ever

We discovered these great 16″x16″ patio pavers at our local home improvement store and got the keen idea to stand them on edge together to create a concrete planter.We demoed the old brick lamp posts, which was oh so very satisfying.We could stagger them and make the planter completely square, or create a rectangular box by placing one paver in between two side pavers.we removed the wooden boards and checked to make sure the box was level once it was on the ground.

And, now, we have the not-so-saddest lamp posts on the block.

How to Anchor a Gazebo to Pavers

There are basically three ways in which you can anchor a gazebo to pavers: drilling them directly into the pavers, driving concrete footers between pavers, or using weights.Anchoring a gazebo to pavers using a drillThis first method is the most reliable form in which you can anchor your gazebo.Anchoring a gazebo to pavers using concrete footersThis method can be tricky depending of what kind of bedding you have under your pavers.

Anchoring a gazebo to pavers using weightsThis is the easier and most adaptable method to anchor a gazebo to pavers.

If that ship has already sailed, there are tons of ways in which you can properly anchor a gazebo to pavers without damaging your pavers or the infrastructure as a whole.

Pergola Posts

Pergola Post InstallationMounted on Concrete Footer or Existing SlabThe easiest method of installation is to dig footings to the correct depth (below the frost line in your area) and use post mounting hardware to attach the posts to the concrete footings or existing concrete slab as follows: Order the 8 foot or 10 foot post option and add the post attachment hardware to your order.If you made any other selection and you’d like to purchase mounting hardware, simply add that selection to your cart from the Accessories section.If you will be installing your pergola on a concrete patio or concrete footings choose Concrete Anchor.

Also the use of concrete form tubes helps this because the smooth surface of the tube will not allow the ground to grab the concrete and pull it up.

We also recommend if you are putting the pergola posts in ground, that you wrap the bottom part of the post that will be in contact with cement in a peel and stick roofing membrane.

Plant a Colorful Mailbox Garden

You might be surprised how many of your neighbors follow suit when they see how pretty a small street-side garden can be.The posts for your mailbox can be used as a climbing support for a vine.For example, some homeowners may plant a border garden that spans their entire lot to add a flowery face to their property.

Try small ornamental grasses that are low growing yet colorful.To keep the lawn from encroaching, use an edging option such as plastic, metal, or stone.

Some mailbox designs feature a small planter on top of the post.Create visual continuity by repeating one of the flowers in the planter box from those in the garden below.

DIY Outdoor Light Pole Planters • Free Plans • Ugly Duckling House

41610 shares 19441416I told you it was coming after Mom’s party and the landscaping post, so here’s the post all about the outdoor light pole planters I made around the deck!It’s probably a surprise to NO ONE that the few planters that checked every box were well beyond my budget.

Insert pole + bucket to the center of the planter and rest it on the bottom supports.In that time, Georgia had two hurricanes pass by our neighboring states and dump their fair share of storms on the house.

I truly can’t wait to have a big sectional on the deck and enjoy a cup of coffee on colder mornings.

Solar Lantern Planter

Shine colorful light upon your prized blooms.Pretty 4-solar-panel lantern on top has butterfly or hummingbird art, designed to look like stained glass, and lights up with 4 LEDs.

Lantern is 13" sq.x 49" h. Planter is 11" sq.

x 11 1/4" h.Additional Information Shipping Restrictions

HYDRANGEAS IN PLANTERS AND A SELF

FacebookTwitterPinterest 630This post is sponsored by Endless Summer ® Hydrangeas.They create a charming divider between the wrap-around porch and the patio and Endless Summer hydrangeas add such a pretty softness to all the hardscaping.

And this year I’m embracing the pretty-in-pink color of the Endless Summer hydrangeas!

Here’s how to make a WINE BOTTLE WATERING STAKE!Materials:wine bottleassorted colored glass pebbles (the kind that goes in the bottom of vases)silicone glass glueClean out an empty wine bottle and soak off the label.

pool planter

Verdego is the place to go for landscape design & expertise in N. Florida.Visit our beautiful garden center in Palm Coast, Florida.

Can't make it in?Give us a call or send us an email to get in touch and discuss your needs.

Much Ado About Mulch

Gardeners are routinely advised to apply a 2 to 3-inch layer of wood chips or bark mulch around new plantings, and to mulch regularly thereafter.Typical planting with bark mulch around widely-spaced plantsThere is plenty of expert advice available about types of mulch and how to use them.

Color-treated mulch does not benefit plants, soil, or wildlifeIncorrect mulching actually damages trees and shrubsUntil recently, however, there has been little discussion about whether it is necessary, or wise, to mulch at all.

The one thing we know for sure, is that it did not evolve in a habitat with a 2 to 3-inch layer of man-made wood mulch.

Open soil in new plantings may be covered with leaf mulch, chopped leaves, or even whole leaves until new plants fill inIn the absence of man-made mulch, nature may offer some wonderful surprises.

The Best 23 Pergola Projects Provide Enjoyable Yard or Garden Stay

There are a lot of different ways to build one pergola, you just need to decide what kind is the best for your outdoor space.Use raw wood to build your backyard pergola with built-in herbs planters:How to build it: abeautifulmess.com.Build cantilevered pergola and then add commercial globe string lights so you can enjoy the deck at night:More details visit here.Set up a little pergola for your back patio that will provide specific shade for the “griller”:The top image details at: ryobitools.com.Add shade and style to backyard pergola with a slide-on wire-hung canopy:How to build it visit here.